2.5"/3.5"/5.25" SATA/IDE to USB 2.0 Adapter
The SATA/IDE-USB Adapter gives you the flexibility of connecting almost any type of drive to your computer via USB. SATA, 3.5" IDE, 5.25" IDE, and 2.5" IDE drives are all supported and can be easily hot-swapped to your system. The included external power adapter will allow you to power your drives outside your system giving you the ability to quickly add or swap between drives without opening your case. The SATA/IDE-USB adapter incorporates 3 interfaces to one USB adapters.
- Hot-Swappable: Plug & Play without Rebooting
- Supports ATA / ATAPI-7
- Supports LBA-48 Addressing
- Easily Add Storage to Any System with USB
- Supports HDD Capacity Up to 8TB
- Transfer Rates Up to 480 Mbps with USB 2.0
- Transfer Rates Up to 12 Mbps with USB 1.1
| Brand | |
|---|---|
| Brand | Vantec Thermal Technologies |
| General Features | |
|---|---|
| Data Transfer Rate | 480 Mbit/s |
| Manufacturer | Vantec Thermal Technologies |
| Cables | |
|---|---|
| Conductor | Copper |
| Cable Length | 3.02 ft |
| Cable Type | IDE/SATA/USB |
| Connector Type on First End | IDE |
| Connector on First End Details | 1 x 44-pin IDE |
| Connector Gender on First End | Male |
| Connector Type on Second End | USB 2.0 - Male |
| Connector Gender on Second End | Male |
Alternative Products
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.