SMALL FOOTPRINT FOR OPTIMAL COMPATIBILLITY
The Freezer i13 X combines a compact advanced heat sink design with 3 direct touch heat pipes. In combination with the fan designed for static pressure, an optimal cooling performance is achieved despite the comparatively small dimensions. The Freezer i13 X has an installation height of only 137 mm and there are no limitations in RAM compatibility.
PRE-APPLIED MX-2 THERMAL PASTE
Pre-applied, high-performing MX-2 thermal paste ensures quick and clean assembly.
LONGER LIFESPAN THANKS TO ITS LOW MOTOR TEMPERATURE
The Freezer i13 X uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 °C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer i13 X.
OFFSET HEAT PIPES ENABLE OPTIMAL HEAT DISSIPATION
The direct touch heat pipes attached to the Freezer i13 X and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.
P-FAN FOR INCREASED PERFORMANCE
Inspired by the P-series, the Freezer i13 X's fan benefits from all of the advantages of P-fans:
- High static pressure for increased cooling performance
- Broad RPM range
- Lower power consumption
- Less vibration
- PWM for synchronous fan control
- Flawlessly absorbs the unwanted heat
- Fluid Dynamic Bearing fan bearing type for maximum cooling/heating usability with added feasibility
- 4-Pin connector enables quick and stable connection with processors
| Brand | |
|---|---|
| Brand | Arctic Cooling |
| CPU / Processor | |
|---|---|
| Compatible Intel Socket | H LGA-1156 |
| Size / Dimensions | |
|---|---|
| Maximum Fan Diameter | 3.94" |
| General Features | |
|---|---|
| Cooler Type | Air |
| Heatsink Material | Aluminum |
| Manufacturer | Arctic Cooling |
| Fan Bearing Type | Fluid Dynamic Bearing |
| Fan Speed (Max) | 2000 rpm |
| Fan Speed (Min) | 300 rpm |
| Number of Fans | 1 |
| Cables | |
|---|---|
| Connectors | 4-Pin |
| Compliance & Certification | |
|---|---|
| Noise Levels (A-Weighted) | 35.8 dB(A) |