The 25/70V 50W Audio Amplifier is the ideal solution for supporting a distributed audio system in a classroom, conference room or other environment that requires installation in a plenum space. This amplifier supplies 50 Watts of power, 25 Watts per channel, and is built to an industry standard 25/70 Volt design. This amplifier supports many advanced features which make it a perfect fit for most applications
Noise Reduction:
Audio systems installed in commercial environments are susceptible to noise caused by an electrical ground loop. This will often manifest as a hum or buzz through the system. This amplifier features noise reduction technology on both the 3.5mm and RCA Stereo Audio inputs. This noise reduction eliminates the interference and allows the audio signal to pass through.
Standby Mode:
After five minutes without a signal, the amplifier will enter standby mode providing energy savings. The amplifier will wake from standby mode automatically when a signal is received.
Accessory Power Output:
The accessory power output provides 12 Volts DC and 500 mAmps.
- TAA Compliant
- C2G 1 Year Warranty
- Designed for installation in Plenum air spaces
- Standby mode saves power
- Industry standard 25/70 volt design for distributed audio systems
- Conference Room Amplifier
- Reduces noise in commercial environments
- 50 Watts of Power
- Plenum Rated
- Classroom Audio Amplifier
| Brand | |
|---|---|
| Brand | Legrand Group |
| Power & Battery | |
|---|---|
| Input Voltage | 230 V AC |
| Audio | |
|---|---|
| Impedance | 18 Kilo Ohm |
| Appearance | |
|---|---|
| Boot Type | FLEX |
| General Features | |
|---|---|
| Maximum Frequency | 20 kHz |
| Minimum Frequency | 100 Hz |
| Manufacturer | Legrand Group |
| Cables | |
|---|---|
| Cable Shielding Type | Unshielded Twisted Pair (UTP) |
| Conductor | Bare Copper |
| Fiber Optic Cable Core/Claddi | 50 µm |
| Cable Length | 2 ft |
| Cable Type | Category 6 |
| Cable Characteristic | Patch Cable |
| Connector Type on First End | RJ-45 Network - Male |
| Connector on First End Details | 1 x RJ-45 Network - Male |
| Connector Gender on First End | Male |
| Connector Type on Second End | RJ-45 Network - Male |
| Connector Gender on Second End | Male |
| Connector Material | Gold Plated |
| Jacket Material | Polyvinyl Chloride (PVC) |
| American Wire Gauge | 30 AWG |
| Compliance & Certification | |
|---|---|
| Environmentally Friendly | Yes |